Select and delete all the paths that lay outside the circle. Select both combined path and circle, and do Path > Cut.ĭo Edit > Paste in Place to bring back the circle which was be consumed in the boolean operation. MakerBot) or a service such as Shapeways. Making a physical model will require a 3D Printer (e.g. Preparing the file for printing will involve ReplicatorG or similar software. To extrude the vector graphic into 3D and add the key ring attachment well use OpenSCAD. Here's a slightly different approach which keeps the lines and circles as complete paths instead of separate shapes,Ĭombine the drawing paths, but keep the circle as a separate path on topĬopy the circle (you''ll need this later) For converting the image to a vector graphic, well use Inkscape (with the Better DXF plugin or R12 plugin). For more on that, see the DXF files post. Also note that you may have to deal with the text items separately. The key to making a dxf work is to make sure that nothing is connected - no grouping or compound paths. Not entirely sure if it will give you the result you want, but I suppose there's no harm trying. If your laser cutter requires one path, you could select all and combine the paths again. Now you can do Path > Combine, or alternatively do Path > Union if you want to get rid of any overlaps. Do Path > Stroke to Path to turn the horizontal stroke into a path. Select and delete all the pieces outside cutting circle. 1 Answer Sorted by: 2 Select everything, and do Ungroup Shift + Ctrl + G 5 times to remove all those unnecessary nested groups. The result will divide everything into separate pieces. when 2 curves are joined it should show only one. Can you export and attach your F3D, Ill take a look in Rhino where you can zoom in further. Fusion just does not seem to consider offsetted line to be a closed. Select everything, then do Path > Division Ctrl/Command+ K. I am having trouble extruding the curve I got by offsetting imported.This example below shows the combined paths filled grey, and the large rectangle filled red.
#INKSCAPE DXF EXPORT ONE PATH HOW TO#
Make a combined path of the drawing plus the circle, by using Path > Combine Ctrl/Command+ K.ĭraw a large filled rectangle, move it under the combined paths using Object > Lower to bottom End. Find out how to convert your image into a DXF and not have to worry about losing any detailInkscape is an exciting free program which helps make this possib. Make sure everything is ungrouped, and there is no clipping mask just a regular circle instead to be used to cut everything out. This can be done in Inkscape relatively easily, and the following method is similar to how the Shape Builder tool works in Adobe Illustrator.
0 kommentar(er)
